Abstract: Coarse aggregate used as part of cement concrete is of primary significance for the obtained parameters of hardened concrete. In case of concretes intended for airfield pavements, the application of granite grit is recommended. Alternative to this type of aggregate in the form of porphyry and amphibolites aggregate was suggested. In order to assess the suitability of different aggregate types for concrete mixes, their bulk density, absorbability, polishing resistance, abrasion and crushing resistance were determined. Also, the internal structure of the suggested aggregates and its influence on changes of hardened concrete composite structure were subject to the assessment. The influence of aggregate type on the structure of cement matrix and contact areas between the matrix and aggregate grains were specified. The observed changes, in case of the internal structure of concretes based on porphyry and amphibolites aggregates , with reference to granite aggregate, resulted in changes of mechanical and physical parameters. Analyses included the determination of bulk density, absorbability, compression, bending and splitting resistance. According to the obtained laboratory test results, the significant influence of the aggregate type applied to the mix on parameters of hardened concrete, with regard to the application thereof to the airfield pavements was proved.
B I B L I O G R A F I A1. PN-EN 1097-7: 2008 Tests for mechanical and physical properties of aggregates.
2. PN-EN 1097-6:2013-11 Tests for mechanical and physical properties of aggregates.
3. PN-EN 197-1:2012 Cement part 1. Composition, specyfications and conformity criteria for common cements.
4. PN-EN 1097-2:2010 Tests for mechanical and physical properties of aggregates.
5. PN-EN 12350-6:2011 Testing fresh concrete. Part 6: Density.
6. PN-EN 12350-2:2011 Testing fresh concrete. Part 2: test.
7. PN-EN 12350-7:2011 Testing fresh concrete. Part 7: Air content - Pressure methods.
8. PN-EN 12390-1:2013 Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds.
9. PN-EN 12390-2:2011 Testing hardened concrete - Part 2. Making and curing speciments for strength tests.
10. NO 17-A204:2015 Airfield concrete pavements - Requirements and test methods for cement concrete pavements.
11. PN-EN 12390-7:2011 Testing hardened concrete - Part 7. Density of hardened concrete
12. PN-EN 12390-3:2011 Testing hardened concrete - Part 3: Compressive strength of test specimens.
13. PN-EN 12390-6:2011 Testing hardened concrete - Part 6. Tensile splitting strength of test specimens.
14. Linek M., Low shrinkage cement concrete intended for airfield pavements, Materials Science and Engineering 245 (2017) 032032 doi:10.1088/1757-899X/245/3/032032
15. PN-EN 1008:2004 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete. 
DOI 
Web of Science