Publikacje

Abstract:

To achieve the rapid heat dissipation of components in the industrial field, the heat dissipation coating is prepared on the surface, which is conducive to improving the service life of the parts and greatly reducing the industrial costs. In this paper, metallized diamond/Cu composite coatings were fabricated on 1060Al substrate by supersonic laser deposition. The composite coatings were prepared at a nitrogen pressure of 3.0 MPa, a scanning speed of 10 mm/s, and a 1060 nm semiconductor coupled fiber laser with different laser power. The research results show that the laser power affects the interface bonding by affecting the temperature of adiabatic shear instability during particle impact. The metallized diamond forms a good bonding at the interface through the plastic deformation of the Cu matrix. Appropriate parameters ensure that the jet does not affect the subsequent particle deposition and build a good heat transfer bridge to elevate the heat transfer efficiency. The coating prepared at a laser power of 1000 W has the highest thermal diffusion coefficient of 89.3 mm2/s and thermal conductivity of 313.72 W/(m·K), which is 8.92% higher compared to the coating prepared without laser. Experiments with thermal imaging have also demonstrated that the coating at optimal parameter transferred heat faster. Our research provides a technical guidance for rapid preparation of high-quality heat dissipation coatings in industry.

POWRÓT

Strona główna > Publikacje

Effect of Laser on the Interface and Thermal Conductivity of Metallized Diamond/Cu Composite Coatings Deposited by Supersonic Laser Deposition