Abstract: The paper deals with the investigations of influence parameters of electrodischarge machining (EDM) on the shape accuracy of holes machined by EDM process. BP-95. machine with electronic generator type was used to perform EDM process. Kerosene was used as a dielectric. During EDM process the parameters of current were permanent. The shape of electrode and way of passing dielectric were changed. The following parameters were determined: productivity of EDM process and shape accuracy of the drilling holes. The accuracy of bored cylindrical holes, is highest in case of hollowing out with the tubular electrode and for sucking out working liquid by her inner life. In the case of hollowing out with the electrode tubular, sinking the tube with pumping liquid by the inner life is the most favourable method causing the smallest mistakes of outlines of the cylindrically shape. The time of boring the arterial hole is shortest in case of hollowing out with the electrode tubular and for pumping working liquid by inside.
B I B L I O G R A F I A[1] ADAMCZAK S., 2008, Geometrical measurements of surface. The outlines of shape, waviness and the roughness,Wydawnictwo Naukowo Techniczne, Warszawa, (in Polish).
[2] ALBIŃSKI K., 1995, The Polarity of Electrodes in Electro-Discharge Machining, Proc. ISEM - XI, Lausanne, 95-104.
[3] DAUW F., VAN COPPENOLLE B., 1995, On the evolution of EDM research. PART 2: From fundamental research to applied research, Proc. ISEM-XI, Lausanne, 133-142.
[4] MIERNIKIEWICZ A., 1999, Theoretical and experimental bases of electric discharge machining (EDM), Kraków, (in Polish).
[5] SPADŁO S., DUDEK D., 2009, Analyzing the technical characteristics of EDM tools, Proceedings of conference 8th EUROPEN CONFERENCE OF YOUNG RESEARCH AND SCIENTIFIC WORKERS -TRANSCOM, Żilina, 193-196.
[6] SPADŁO S., DUDEK D., 2009, The investigations of usable characteristics of EDM machine BP-95d, Zeszyty Naukowe Politechniki Świętokrzyskiej - Terotechnologia, Budowa i Eksploatacja Maszyn, 13, 374-379, (in Polish).
[7] SPADŁO S., 2006, Theoretical and experimental aspects of electric discharge and mechanical machining, Monografie, Studia, Rozprawy, 52. Wydawnictwo Politechniki Świętokrzyskiej, Kielce, 195. (in polish).
[8] SPADŁO S., DUDEK D., 2008, Experimental investigation of technological characteristics of EDM machine BP-95, Zeszyty Naukowe Politechniki Świętokrzyskiej Nauki techniczne - Budowa i Eksploatacja Maszyn Z, 11/281-288, (in Polish).
[9] SPADŁO S., DUDEK D., MŁYNARCZYK P., 2011, Analyzing the shape deviation cylindrical holes machined by EDM (electro discharge machining) process, Proceedings of conference 9th EUROPEN CONFERENCE OF YOUNG RESEARCH AND SCIENTIFIC WORKERS -TRANSCOM, śilina, 175-178.
[10] SPADŁO S., 2002, Comparative studies of brush electrodischarge machining with electrodes of alloy steel and tungsten, Advanced Manufacturing Systems and Technology, International Centre for Mechanical Sciences (CISM), Courses and Lectures - No.437, ISBN 3-211-83689-6, Springer - Verlag Wien New York, 515-524. 
Pełny tekst 
YADDA/CEON